For use in wiring of low voltage outdoor lighting circuits where the cable must be suitable for direct burial.

Underground Low-Energy Circuit Cable.

• Twisted Triple Cable Assemblies Constructed Using Single Conductor Underground Feeder Cable Specified in the Table Above.

• For use in circuits operating at 600V or less, where an assembly of single conductor type UF cables are required.

• Standard put-ups: 500', 1,000', and Bulk

• Standard Color Code: White, Black, and Green

• Custom constructions using various gauge sizes and/or color combinations can be made to meet customer specifications.

· UL Listed Multi-Conductor Thermoplastic Polyethylene-Insulated

· For use in the wiring of irrigation control systems where the cable must be suitable for direct burial.

· Golf Course Sprinkler System Wire

· Low Voltage

· 18 AWG Solid Bare Copper Conductors

· Standard put-ups: 500', 1,000', and Bulk

· Standard Color Code

· Black Jacket Standard

Single Conductor Polyethylene-Insulated Golf Course Sprinkler System Wire with solid or stranded bare copper conductor. For use in satellite solenoid control on golf courses and lawns, intended for direct burial.

Also, for use as a direct burial perimeter or locating wire rated 75°C 300V wet or dry locations. Oil & solvent resistant, extra tough polyethylene insulation formulated to provide excellent oxidative stability, toughness, and abrasion resistance.

For use as described in ART. 340 of the NEC

Standard Put-Ups: 500' / 1,000' / 2,500' and Bulk

Standard Color Code: White, Red, Blue, Black, and Green

Control cable with Aluminum Mylar Shield Stranded Tinned Copper Drain Wire

Two circuit and one ground conductor | Right angle grounded male plug

· 20 AWG Solid Bare Copper Conductors

· For use in low voltage circuits requiring a jacketed multi-conductor cable

· Circuit Cable Type CL2

· Standard Color Code

· PVC Insulated & Jacketed

· Low Voltage

· Consult Sales Department for your particular requirements

Solid or Stranded Bare Copper Conductor | Soft Drawn Fully Annealed

For use where an uninsulated bare copper conductor is required for grounding applications.